CLARITY FIELD NOTES
Frame size guide and artwork planner
A frame’s outside measurement is not the same as its printable paper area. Start with the inside area that holds the print, then subtract the mat and any art margin.
Understand the measurements
Clarity’s Frame & art planner treats Frame width and height as the inner paper area. The outer frame moulding is not part of the calculation. A mat covers the print’s edge; a margin adds blank paper between the mat opening and the artwork. Real framing usually also needs a small overlap to keep the print from slipping through the opening.
A worked example
For a 300 × 400 mm inner frame area and a 30 mm mat on each side, the mat opening is 240 × 340 mm. Add a 10 mm art margin and the available artwork area becomes 220 × 320 mm. A 200 × 300 mm image fits proportionally at 213.33 × 320 mm. At 300 PPI, rounding up requires 2520 × 3780 pixels.
The preview shows a fit, not a cut specification
The planner scales the artwork to fit the available area without stretching. Extra space can remain if the proportions differ. The diagram is an approximate proportional guide. It does not model frame moulding, glazing, mounting tolerances, mat bevels, bleed or cutting loss.
Prepare a print that fits
Measure the actual opening and the backing area before ordering. Ask your framer for their overlap and mounting requirements. Use Add padding when you want the whole image centered on a larger sheet. Use Crop for a deliberate edge-to-edge composition.
Open the print and frame tools to change the dimensions. The PPI field in the print calculator also controls the frame planner’s pixel recommendation.
Open the free image studio · Calculate print size